Honeywell W7459A1001 - Economizer Logic Module

 
$70.78
SKU:
W7459A1001
Qty:
 
 

The Honeywell W7459A1001 Solid State Economizer Logic Module is used with M7415 and M8405 Dedicated Economizer Actuators to proportion outdoor and return air dampers in economizer systems.

Features

The W7459A1001 attaches to one side of actuator for proportional control of damper and combines solid state changeover control, minimum damper position potentiometer and compressor staging relays. Use one sensor in outdoor air for single sensor control; use two sensors, one in return air and one in outdoor air, for differential control.

Product Specifications

DescriptionEconomizer Logic Module (works with M7415 Damper Actuators)
OutputOutput for M7415
Input Enthalpy Sensor:C7400
Input Discharge Air Temperature sensor:C7150 or C7046
InputY1 and Y2 from thermostat
Use withSensor C7660, Sensor C7046, Sensor C7150, Sensor C7400
Voltage24 Vac
Frequency50 Hz, 60 Hz
Contact Ratings1.5 A Run @ 24 Vac, 3.5 A Inrush @ 24 Vac
Operating Temperature Range (F)-40 F to +125 F
Operating Temperature Range (C)-40 C to +52 C
Operating Humidity Range (% RH)5 to 95% RH, non-condensing
Dimensions (in.)4 1/16 in. high x 2 13/16 in. wide x 1 1/4 in. deep
Dimensions (mm)103 mm high x 71 mm wide x 32 mm deep
Approvals, Underwriters Laboratories IncUL Listed File: E4436, Guide: XAPX2, CE Report: GV97-010, Flammability Rating UL94V-5V
CommentsEconomizer Logic Module. Optional remote minimum position potentiometer. Used With M7415 Damper Actuator. M7415A1006