The Honeywell W7459A1001 Solid State Economizer Logic Module is used with M7415 and M8405 Dedicated Economizer Actuators to proportion outdoor and return air dampers in economizer systems.
Features
The W7459A1001 attaches to one side of actuator for proportional control of damper and combines solid state changeover control, minimum damper position potentiometer and compressor staging relays. Use one sensor in outdoor air for single sensor control; use two sensors, one in return air and one in outdoor air, for differential control.
Product Specifications
| Description | Economizer Logic Module (works with M7415 Damper Actuators) |
| Output | Output for M7415 |
| Input Enthalpy Sensor: | C7400 |
| Input Discharge Air Temperature sensor: | C7150 or C7046 |
| Input | Y1 and Y2 from thermostat |
| Use with | Sensor C7660, Sensor C7046, Sensor C7150, Sensor C7400 |
| Voltage | 24 Vac |
| Frequency | 50 Hz, 60 Hz |
| Contact Ratings | 1.5 A Run @ 24 Vac, 3.5 A Inrush @ 24 Vac |
| Operating Temperature Range (F) | -40 F to +125 F |
| Operating Temperature Range (C) | -40 C to +52 C |
| Operating Humidity Range (% RH) | 5 to 95% RH, non-condensing |
| Dimensions (in.) | 4 1/16 in. high x 2 13/16 in. wide x 1 1/4 in. deep |
| Dimensions (mm) | 103 mm high x 71 mm wide x 32 mm deep |
| Approvals, Underwriters Laboratories Inc | UL Listed File: E4436, Guide: XAPX2, CE Report: GV97-010, Flammability Rating UL94V-5V |
| Comments | Economizer Logic Module. Optional remote minimum position potentiometer. Used With M7415 Damper Actuator. M7415A1006 |