Honeywell RA890G1260 120 Vac Protectorelay®

 
$1,094.80
SKU:
RA890G1260
Qty:
 
 

The Honeywell RA890G1260 120 Vac Protectorelay® provides solid state, electronic flame safeguard protection for industrial and commercial single or dual fuel burners applications using Ultraviolet flame detectors.

• Designed for interrupted ignition with intermittent pilot on gas burners, and interrupted or intermittent ignition on oil burners.
• Use with a C7027, C7035 or C7044 Minipeeper Ultraviolet Flame Detector for flame sensing.
• Recycles if flame signal lost while in Run. Failure to establish pilot results in a lockout.
• Safe-start check prevents start-up if flame-simulating failure occurs in flame detector circuit.
• Includes SPDT alarm contacts.
• Solid state circuitry eliminates warm-up and increases vibration resistance.
• Mounts and removes easilywith captive mounting screws.
• Strong thermoplastic mounting base.

Description Ultraviolet, with alarm contacts
Application Either a line or low voltage controller can be used
Flame Failure Response Time (sec) 3.0 sec
Safety Switch Timing 15 seconds
Voltage 120 Vac
Frequency 50 Hz
Frequency 60 Hz
Alarm Relay Switching SPDT
Temperature Range
50 Hz models -20 F to +105 F (-29 C to +41 C)

60 Hz models -20 F to +115 F (-29 C to +46 C)
Dimensions
5 in. high x 5 in. wide x 4 3/4 in. deep (including subbase)
  127 mm high x 127 mm wide x 121 mm deep (including subbase)
Approvals UL Listed: 120V models only; File No. MP268, Guide No. MCCZ

CSA Certified: 120V models only; File No. LR9S329
Approvals, Factory Mutual Approved: Report No. 22013