Honeywell R7849A1023 Flame Amplifier, Ultraviolet, FFRT: 2.0 sec or 3.0 sec, for 7800 Series Relay Modules

 
$156.15
SKU:
R7849A1023
Qty:
 
 

Solid state plug-in amplifiersrespond to flame detector inputs; indicate flame presence when used with 7800 SERIES relay modules.

• Flame failure response time = 0.8 or 3.0 seconds.
• Flame signal strength range = 0.0 to 5.0 Vdc.
• Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
• Flame signal test jacks to measure amplifier flame signal voltage.
• Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
• Compatible with existing Honeywell flame detectors (order separately).

Product Specifications  
 
Type Ultraviolet
Flame Failure Response Time (sec) 2.0 sec or 3.0 sec
Self Checking None (standard)
Use With Primary Safety Control 7800 SERIES Relay Modules
Use With Flame Sensor Gas, Oil: Minipeeper C7027A, C7035A, C7044
Approvals, Underwriters Laboratories Inc Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association Certified: File No. LR95329-3
Approvals, Swiss RE (formerly IRI) Acceptable
Approvals, Factory Mutual Approved: Report No. 1V9A0.AF
Comments Color: Purple